How to improve vendor negotiations

List of the contents of this article:

• 1,How to improve vendor negotiations How to return if the engine shakes when the Rongwei 750 does not give oil when changing the steel cushion cool car
• 2 、Rongwei 75 0 large fuel consumption

How to return the engine shaking and no oil when the Rongwei 750 is replaced after replacing the steel cushion cool car

The engine carbon has been cleaned, the throttle valve has been cleaned, and the oil pad has also been replaced. If you still find that the body shakes after all these, it is recommended that you go to the maintenance The repair shop checks whether the fuel supply pressure and the intake pressure sensor are normal. If the oil supply pressure of the oil pump is abnormal, the numerical error and improper operation of the intake pressure sensor will cause the body to shake.

The quality of the oil is poor. When there are too many impurities or too much moisture in the fuel, it will naturally lead to insufficient power, and poor-quality fuel can easily lead to the blockage of oil pump filters, gasoline filters, fuel injectors and other components with small holes or filtering functions, resulting in poor oil supply and engine function decline.

Replacing the cylinder pad of Rongwei 750 is a relatively complex maintenance task. You need to pay attention to the following points: confirm whether the cylinder pad needs to be replaced. If the water temperature in the engine is too high, there is gasoline or water in the water tank, and the oil becomes cloudy, it is likely that there is a problem with the cylinder cushion.

What should be changed was the accelerator pedal, but the one that should not be changed was all replaced, and no one mentioned what should be changed. This may be the current situation of the auto repair industry; the car owner thinks he has been deceived, and the repairman says that I am serious, which makes the two sides more and more distrustful.

Hello, if the spark plug cylinder line and ignition coil are all checked, how about measuring the steel pressure with the instrument? Measure all 4 steel pressures and compare them. If there is an obvious difference, it is caused by the damage of the cylinder pad. [ If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.

It should be tightened according to the required torque. Too much loosening will cause air leakage. Too tightening will make the gasket lose its elasticity, which will also cause air leakage. Because the conical seat spark plug does not use a sealing pad, it is especially important to observe the tightening torque.

What's wrong with the Rongwei 750 engine fault light on

The fault light is likely to be due to oil problems; if the fault light continues to be on and the vehicle has obvious abnormalities in use, you should go to the 4s store immediately. On-site maintenance; For your car, it is recommended that you change the gas station first and then drive at high speed. If the fault light will turn on after driving at high speed, it is recommended that you go to the 4s store in time to get the fault code.

Rongwei 750 accelerates speed to exceedThe failure light of more than 3,000 may be due to the following reasons: Engine system failure: It may be caused by the failure of the engine control unit. The specific cause of the failure can be determined by checking the fault code, such as ignition system failure, fuel system failure, etc.

It is recommended to go to the repair shop for computer testing and pay attention to the safety of the car. I hope my answer can help you [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.

If it is not for the constant serious shaking, the ignition coil can basically be ruled out. The age of the vehicle is too large and the mechanical aging causes the engine to be in poor working condition, resulting in poor combustion and ignition, resulting in the alarm light on. The failure of some sensor computer boards itself causes the alarm light to turn on. There are many reasons why the alarm light is on, but the first three are the most common.

The quality of the oil is poor. When there are too many impurities or too much moisture in the fuel, it will naturally lead to insufficient power, and the poor-quality fuel can easily lead to the blockage of the oil pump filter, gasoline filter, fuel injector and other parts with small holes or filtering functions, resulting in poor oil supply and decreased engine function.

What is the compression ratio of Rongwei 750

1. For example, No. 90 gasoline can ensure that it does not produce explosion when used in engines with a compression ratio of less than 9, and No. 97 gasoline can ensure that the compression ratio is not greater than 7 There will be no explosion when used in the engine.

2. Hello, I'm a Rongwei MG car purchase consultant. Rongwei 750 has extraordinary atmosphere, stable power, good acceleration and control performance.The high-performance engine is powerful, faster, and the speed of the car responds more directly to the accelerator underfoot. There is no small problem with quality, but its fuel consumption will be higher.

3. The key indicators of Rongwei 7508T are all higher than those of the Accord 4L, but the price is about 30,000-50,000 yuan cheaper than the 4L Accord, which is very cost-effective.

4. If the compression ratio in the cylinder is more than 10, it is better to add 97# oil, otherwise the engine will explode and damage the life of the machine.

How about the Rongwei 750 engine?

The Rongwei 750 8T engine adopts ultra-high-pressure and medium-cooled turbocharging technology, which is equivalent to the displacement of 3L of natural intake. Like the 8th generation Accord 4L i-VTEC technology, it is the most advanced engine technology in the same class.

Through the Siemens EMS management system, the engine can provide 135KW/power for the Rongwei 750 with a weight of up to 6 tons, with a maximum output torque of 240NM. It is reported that the engine of the LANDROVER God Walker originated from this sect.

Rongwei 750 has a six-cylinder engine, which is very powerful and has excellent performance.Worth having: 1. The 24-valve high-performance KV65L engine with aviation-grade cutting-edge technology is the biggest highlight of SAIC Rongwei 750. The Land Rover God Walker engine originated from this case.

The medium-sized car Rongwei 750 owned by SAIC is priced at 200,000 yuan, equipped with an 8T engine, and the quality on the road is nearly two tons. With 5AT gearbox, the fuel consumption of the whole vehicle is really not low. The fuel consumption of driving in urban areas is still high, and a large number of friends reported that the fuel consumption is close to 15L. BJ80 is the second hardcore SUV under BAIC, with the tough appearance of the Mercedes-Benz G series.

What's wrong with the Rongwei 750 engine fault light?

The reason why the Rongwei 750 engine lights up: 1.The light on the engine indicates that the engine is faulty, which is divided into occasional faults and persistent faults. The occasional light of the fault light is an occasional fault, which can be used continuously. Generally, this situation is mainly related to emissions. You can refuel at another gas station. Try it first.

It is recommended to go to the repair shop for computer testing and pay attention to the safety of the car. I hope my answer can help you [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.

The sudden acceleration speed of the Rongwei 750 exceeds 3,000. The fault light may be due to the following reasons: Engine system failure: It may be caused by the failure of the engine control unit. The specific cause of the failure can be determined by checking the fault code, such as ignition system failure, fuel system failure, etc.

If it is not for the constant serious shaking, the ignition coil can basically be ruled out.The age of the vehicle is too large and the mechanical aging causes the engine to be in poor working condition, resulting in poor combustion and ignition, resulting in the alarm light on. The failure of some sensor computer boards itself causes the alarm light to turn on. There are many reasons why the alarm light is on, but the first three are the most common.

The quality of the oil is poor. When there are too many impurities or too much moisture in the fuel, it will naturally lead to insufficient power, and poor-quality fuel can easily lead to the blockage of oil pump filters, gasoline filters, fuel injectors and other components with small holes or filtering functions, resulting in poor oil supply and engine function decline.

Rongwei 750 consumes a lot of fuel

1. The engine with high fuel consumption of Rongwei 750 is a 5-liter v6 engine.

2. Rongwei 7505v6The comprehensive fuel consumption per 100 kilometers is about 11L. The high fuel consumption of 5 is mainly due to the fact that the cylinder of 5 is burning oil when idling. This model is heavy, and the engine does not have VVT. Compared with cars of the same level, the fuel consumption is still a little high.

3. Rongwei 750 is good. It is an elegant public and business car with extraordinary elegance. It is also suitable for young people to drive. Its power is stable, and the acceleration and handling performance are good.

4. What should I do if the Rongwei 750 consumes a lot of fuel? If the fuel consumption is high, it is recommended that drivers change their driving habits and try to drive on some relatively flat roads. 70 is an old car under Rongwei, which has been discontinued. The Rongwei 750 is equipped with two engines, one is a 5-liter naturally aspirated engine and the other is an 8-liter turbocharged engine.

5. Rongwei 750 fuel consumptionThe relatively high Rongwei 750 is equipped with two engines, one is a 25-liter naturally aspirated engine, and the other is an 18-liter turbocharged engine. The 25-liter naturally aspirated engine of the 750 is coded 25k4f. This engine is a v6 engine, and the maximum power of this engine is 135kw. , the maximum torque is.