1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
How to find HS code data for specific countries-APP, download it now, new users will receive a novice gift pack.
1. Normal. The original Tianhong 90 motorcycle is an 86-cylinder block, and the sound of Tianhong 90 motorcycle changing the middle cylinder is still the same, indicating that the replaced middle cylinder is also an 86-cylinder block, which perfectly matches the Tianhong 90 motorcycle. After replacing the middle cylinder, the sound and nature of the engine remain stable and there is no abnormality. Therefore, the sound of changing the middle cylinder of Tianhong 90 motorcycle is still normal.
2. The upper left corner of the Japanese cylinder is marked with 85cm, and the upper right corner is HM-C1 or HM-C2 or HM-C3 or HM-B1 or HM-B2 or HM-B3.Domestic products are rarely marked with 85 and most of them are 86, but there are also some marked with 85. The process traces at the left guide wheel hole are also different.
3. The motorcycle cylinders of Tianhong 90 are the same as 85 and 86. Motorcycles, two-wheeled or three-wheeled vehicles driven by gasoline engines and controlled by hand-controlled front wheels, are light, flexible and fast. They are widely used in patrols, passenger and cargo transportation, etc., and are also used as sports equipment.
4. Tianhong 90 was produced by the former Tianjin Honda. It adopts an imported Honda engine with a non-electric start 90CC and a 12V circuit. It is a well-known model in the 1990s. Changing the middle cylinder of Tianhong 90 to 86 will increase fuel consumption, increase the crankshaft and valve load, and reduce the cylinder compression ratio, which has a great impact on power.
5. Tianhong 90 motorcycle cylinders, 85 and 86 are the same.It's just that because the cylinder volume is rounded up after the decimal point and the tail number, if there is no rounding, it is written as 85, and if there is no rounding, it is written as 86. In fact, it is the same. Most manufacturers are marked 85, and there are fewer marked with 86.
6. Tianhong 9o motorcycle cylinder can be replaced with 86. 90 and 86 are the same. It's just that because the number of the decimal point of the cylinder volume is rounded up, the one without rounding is written as 86, and the rounded one is written as 90. In fact, it is the same. Most manufacturers mark 90, and fewer are marked with 86.
1. Jialing 70 imported high-pressure package igniter and Tianhong 90 are not universal. Jialing 70 imported high-voltage package igniter and Tianhong 90 external meridian are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, and the two cannot be used interchangeable.
2. The high-voltage package and igniter of K90 are integrated and cannot be interchanged with TH90. The igniter and high-voltage package must be purchased (Jialing 70 is fine).
3. No. The magnetic motor of Jialing 70 and Tianhong 90 are the same, but the voltage stroke of Jialing 70 is shorter than that of Tianhong 90, so the two cannot be used in common. Motor refers to an electromagnetic device that converts or transmits electrical energy according to the law of electromagnetic induction.
4. Can't be used. Although Jialing 70 and Jialing 90 are both produced by Jialing Group, the difference between them is still very big. 90 The mouth of the 2 pins above: the left is turned off, and the upper row of the mouth of the 4 pins under the ignition power input on the right: the left output to the high-voltage package, and the lower row of the mouth of the 4 needles on the ground on the right: trigger on the left.
5. It depends on whether the original machine has not been opened! Have you changed the middle cylinder? The original cylinder is 85. It doesn't make much sense if it has been replaced! If you haven't changed it, I suggest you that you need Tianhong 90. Come back with a very durable horizontal cylinder engine. Theoretically, it is fine.Generally, it is an engine equipped with Tianhong 90.
1. The oil filter of the motorcycle is often placed under the cylinder block, and then there are three bolts. In a tightened filter cover, 80% of the motorcycles are in, the engine On the right side, then remove the three bolts, open the cover and take it out. The oil filter is generally used for motorcycle filters, and the replacement cycle is 2000 to 3000.
2. Near the left spark plug. The engine number is uniformly engraved near the left spark plug at the factory, so the Tianhong 90 engine number is near the left spark plug, and the engine number can also be found on the vehicle driving license, which is compiled to prevent engine modification.
3. It is an imported machine. If the five letters "HONDA" on the engine are white and engraved on the engine, it is imported if you don't feel it. On the contrary, if the font is black and deeply engraved, it must be domestic.
Industry consolidation via HS code data
author: 2024-12-24 02:13Industry-specific trade growth forecasts
author: 2024-12-24 01:07Customs data verification services
author: 2024-12-24 01:07HS code-based sourcing opportunities
author: 2024-12-24 00:28Agriculture trade by HS code in Africa
author: 2024-12-24 00:24Processed nuts HS code references
author: 2024-12-24 01:33How to interpret complex trade patterns
author: 2024-12-24 01:22International trade KPI tracking
author: 2024-12-24 00:56HS code-focused compliance audits
author: 2024-12-24 00:48Automotive supply chain transparency tools
author: 2024-12-24 00:47923.79MB
Check844.55MB
Check819.43MB
Check914.72MB
Check241.98MB
Check536.29MB
Check786.45MB
Check627.73MB
Check845.51MB
Check369.46MB
Check987.22MB
Check612.54MB
Check863.51MB
Check351.82MB
Check728.69MB
Check311.85MB
Check274.34MB
Check846.54MB
Check136.37MB
Check291.26MB
Check676.64MB
Check279.41MB
Check529.42MB
Check789.24MB
Check466.64MB
Check135.18MB
Check448.36MB
Check592.18MB
Check299.31MB
Check152.67MB
Check892.89MB
Check247.62MB
Check167.69MB
Check841.87MB
Check325.78MB
Check238.13MB
CheckScan to install
How to find HS code data for specific countries to discover more
Netizen comments More
1464 How to find ethical suppliers
2024-12-24 02:25 recommend
2591 How to find emerging export markets
2024-12-24 01:52 recommend
2554 Enhanced due diligence via HS code
2024-12-24 01:06 recommend
1643 How to identify correct HS codes
2024-12-24 00:51 recommend
2414 How to align trade data with marketing
2024-12-24 00:23 recommend