Global sourcing directories by HS code

List of contents of this article:

• 1, How to reinstall the computer system
• 2, Steps to reinstall the system with a USB flash drive
• 3. How to assemble a computer by yourself to install the system
• 4, How to install win10 steps in the computer system
• 5, Computer system installation steps

How to reinstall the computer system

Set the computer optical drive startup Set the computer to the computer to optical drive startup (in starting the computer At that time, press the DEL key continuously or (laptop) press F2 to enter the CMOS settings and press F10 to save).

Reinstalling the computer system mainly includes the followingMethod: Use the built-in recovery function of the operating system, use the system installation disk to reinstall, and reinstall the system through third-party software. First of all, it is a relatively simple way to reinstall using the built-in recovery function of the operating system.

This article will introduce the steps of reinstalling the computer system to help readers better understand the process. Put the system CD into the optical drive, and restart the computer! Enter the BIOS settings. Press the delete key before the system starts to enter the BIOS settings.

The operating system is a necessary operating environment for the computer. If you encounter a system failure, you need to reinstall the system. Many people still don't know how to reinstall the system on the computer. In fact, there are many ways to reinstall the system. Commonly used are USB disk reinstallation and hard disk reinstallation. Here, take the hard disk reinstallation of the win7 system as an example, and the big Introduce the operation steps of how to reinstall the system on the computer.

The computer uses CD-ROM to reinstall the system. The operation steps are as follows: Prepare the system CD-ROM and prepare the system CD-ROM: If not, you can buy it in the computer store.

These will disappear after the system is formatted and installed. Prepare a system disk (USB disk system boot disk is also acceptable), and pay attention that it must be usable. Download the driver, download, and back up your driver. It's best to download it from the official website.

Steps to reinstall the system with a USB flash drive on the computer

1. Restart the computer and press the F10 key to enter the quick boot startup, select the USB disk to boot into Windows PE, format the partition with the hard disk tool, and set the main lead The guide partition is the C disk, and the image file can be restored to the C disk with third-party restoration software.

2. Make a USB disk boot disk, download the u boot USB disk installation tool and install it; connect the blank USB disk to the usb interface, and the USB disk is 8G or more; after the USB disk boot disk production tool reads the USB disk, click to start production, and then wait patiently for the USB disk boot disk production to complete.

3. Preparation: 1 Make a cabbage USB disk boot disk 2 Download the ghost win7 system mirror package and put it into the made cabbage USB disk boot disk.

4. If you made a backup when the installation of the system was completed in the past, you can use the backup to restore the system. If you don't make a backup, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.

5. This is the step of the USB disk installation system ""The cabbage USB disk boot disk is first made into the cabbage USB disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk startup to enter the cabbage main menu, select the "[04] Cabbage Win2003PE Classic Edition (old machine)" option, and press the Enter key to confirm.

How to assemble the computer by yourself to install the system

1. First, you need a legal operating system installation CD-ROM or a bootable operating system installation USB flash drive. Set the boot order and enter the BIOS setting interface, and set the boot order to start from the CD-ROM or USB flash drive first. Insert the installation media to insert the installation disc into the optical drive or insert the USB flash drive into the USB port of the computer.

2、Prepare the installation media: First,Global sourcing directories by HS code you need to prepare an operating system installation disk or a bootable USB flash drive. This installation media contains the required system files to complete the installation process.

3. Prepare the installation media: it can be a CD-ROM, a USB flash drive or a downloaded system image file. Enter the BIOS settings: Press the corresponding key (usually the Del or F2 key) when turning on the power to enter the BIOS setting interface.

4. If you want to reinstall your computer's operating system, you need to prepare an installation disk, usually a DVD or a USB flash drive. Next, you can follow these steps to reinstall: prepare the installation disk, insert the installation disk into the computer, and then start the computer.

5. Prepare the system CD: such asIf you can't go to the computer store to buy it, you can buy the latest version of the CD-ROM of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.

6. First, use a computer that can surf the Internet normally, search [Xiaobai System Official Website] through Baidu, enter Xiaobai official website to download the genuine Xiaobai reinstall system software, or click the link below to download. Insert a blank USB flash drive with a capacity of more than 8G into the computer.

How to install win10 steps for computer system

1. Lenovo power-up and click F12 to select start the device to install the system 2 Make the USB disk installation master USB disk boot disk, and store the downloaded win10 system image file in the GHO folder. 3 Connect the USB disk to the computer, and when restarting and waiting for the screen, quickly press the boot shortcut "F12" to enter the boot window and select.

2. The steps are as follows: restart the computer, press the F2 key according to the prompts of the system screen when starting up (different computer BIOS versions may be different, you need to look at the prompt button of the startup), pressThe arrow keys enter the BOOT menu and set the first boot device to USB Storage Device.

3. The new "cloud reinstallation" function since the Win 10 2004 version makes the reinstall system no longer need a USB flash drive, but directly downloads and reinstalls Win 10 in the cloud. Enter [Start] [Settings] [Update and Security] [Restore] in turn, and click [Start] under "Reset This Computer".

4. Enter the BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI Start) Press F10 to save, insert the system installation USB flash drive, restart and press ESC to select the startup item.

5. Insert the USB flash drive into the computer, open the Xiaobai one-click reinstall system software, close the anti-virus tool before use, wait for Xiaobai to complete the detection environment, click the production system, and click to start production. Choose the system we want. Here you can choose the win10 system and click to start production.

Computer system installation steps

1. Insert the system disk (system CD-ROM and system USB disk) into the computer. Set the BIOS to restart the computer, enter the BIOS, and set the system disk as the preferred boot device in the BIOS. After the boot system is restarted, the system starts from the system disk, and the installation is normal after booting.

2. If you want to install xp, fill in the serial number first.(It is recommended that you use the genuine system to install) Select the installation partition and then choose which partition to install. In the future, you can fill in the information in the place where your information should be filled in. Installing the system is as simple as installing software.

3. The system file is damaged and needs to be reinstalled. The computer uses CD-ROM to reinstall the system. The operation steps are as follows: prepare the system CD-ROM. Prepare the system CD-ROM: If not, you can buy it in the computer store.

4. Preparation: Backup C disk and important files on the desktop. System download: ghost win system, the version depends on the need, take win7 as an example here. Reinstall tool download: one-click GHOST. Decompression tools: WinRAR or good compression and other decompression software.