1. It has a certain function. It protects the engine, greatly reduces wear, prevents the engine from overheating, and prolongs the life of the engine; enhances the comprehensive performance of lubricating oil, and significantly improves synthetic oil and mineral oil.
2. The engine cleaner has a certain protective effect on the engine, but it should be noted that if it is not a frequently cleaned vehicle, it should be used with caution, because the cleaned carbon material will block the oil filter and may cause damage to the engine.
3. In fact, after some engine protectors are added to the engine, the phenomenon of engine oil burning is reduced and the cylinder pressure rises, which is caused by the engine protector increasing the viscosity of the oil, not the engine protector that repairs the wear of the cylinder.
4. In addition to the regular car oil maintenance, other maintenance needs to be done. When you go to the car 4S store for engine maintenance, you will often be suggested to apply engine protector. Is it necessary to have an engine protector? What is the use of engine protector? Many car buyers have this kind of doubt. Let's take a look together.
5. It's effective. I use the super-strong full-effect protective agent for the engine of Weili Lion.
The engine protective agent can form an extremely thin but extremely high-resistant surface in the high-temperature and high-pressure environment of the engine. The molybdenum alloy protective layer with good compressive strength and wear resistance is a layered hexagonal crystal film that can significantly reduce the friction coefficient.
The closer to the oil change cycle, the more serious the engine wear is. Oil is liquid lubrication, which cannot solve the problem of cold start and rapid start at low temperature. At the same time, with the increase of use time, the lubrication effect is inversely proportional. And the engine protector just solved this problem.
There is no need. The current engine and lubricant have beenAfter complete preparation, the original engine oil has been able to complete its mission, lubrication, sealing, heat dissipation, cleaning and wear reduction. The original engine oil already contains additives such as wear reduction, so it is not recommended to use additive products other than engine oil.
More attention should be paid to the maintenance of the engine. As the power source of the car, maintenance of the engine is particularly important. In addition to regular oil maintenance, other maintenance is also needed. When you go to the 4s store for engine maintenance, you are often advised to use engine protector.
I'll tell you very clearly: no need! The so-called engine protector is to levy your IQ tax. There are already many kinds of additives in the oil used in engine maintenance, including enhancing lubrication, removing sludge carbon, preventing metal corrosion, regulating the sticky temperature characteristics, etc., as many as a dozen additives.
Useful. Function: Anti-wear agent is added to the protective agent, which can effectively prevent the internal parts of the engine from accelerating wear, and reducing the resistance can make the engine get better power in the state of good speed. Reduce noise. Performance: ● It can effectively reduce wear and resistance, improve mechanical efficiency, and reduce engine noise.
1. Che David's anti-wear protector is useful, because the quality of Che David's anti-wear protection agent is reliable, the wear-resistant effect is obvious and the cost-effective, and the reputation is very good.
2. The wear-resistant effect is obvious: the use of anti-wear protector of the car David engine can significantly reduce the wear of engine parts and extend the service life of the engine.It can form a protective film to reduce direct contact with the metal surface and reduce wear and friction.
3. Reliable. According to the inquiry enterprise investigation, Che David has a business license, is filed in the Administration for Industry and Commerce, and has legal protection, so Che David is reliable. The anti-wear protector of the car David engine has a certain effect.
4. The engine wear-resistant protective agent has a certain effect, but it is only temporary. A good protective agent is also relatively expensive, and the oil has a proportion. Adding additives at will may change the nature of the oil and affect the state of the engine. So it's better to change to a higher level of engine oil.
5. Che David engine wear-resistant protector is an additive that can be used to protect automobile engines. However, cars of different brands and models may addThe applicability of additives is different, so it is recommended to check the instructions of the car or consult the manufacturer or repair shop before use to ensure that the additive is suitable for your car.
How to ensure tariff compliance-APP, download it now, new users will receive a novice gift pack.
1. It has a certain function. It protects the engine, greatly reduces wear, prevents the engine from overheating, and prolongs the life of the engine; enhances the comprehensive performance of lubricating oil, and significantly improves synthetic oil and mineral oil.
2. The engine cleaner has a certain protective effect on the engine, but it should be noted that if it is not a frequently cleaned vehicle, it should be used with caution, because the cleaned carbon material will block the oil filter and may cause damage to the engine.
3. In fact, after some engine protectors are added to the engine, the phenomenon of engine oil burning is reduced and the cylinder pressure rises, which is caused by the engine protector increasing the viscosity of the oil, not the engine protector that repairs the wear of the cylinder.
4. In addition to the regular car oil maintenance, other maintenance needs to be done. When you go to the car 4S store for engine maintenance, you will often be suggested to apply engine protector. Is it necessary to have an engine protector? What is the use of engine protector? Many car buyers have this kind of doubt. Let's take a look together.
5. It's effective. I use the super-strong full-effect protective agent for the engine of Weili Lion.
The engine protective agent can form an extremely thin but extremely high-resistant surface in the high-temperature and high-pressure environment of the engine. The molybdenum alloy protective layer with good compressive strength and wear resistance is a layered hexagonal crystal film that can significantly reduce the friction coefficient.
The closer to the oil change cycle, the more serious the engine wear is. Oil is liquid lubrication, which cannot solve the problem of cold start and rapid start at low temperature. At the same time, with the increase of use time, the lubrication effect is inversely proportional. And the engine protector just solved this problem.
There is no need. The current engine and lubricant have beenAfter complete preparation, the original engine oil has been able to complete its mission, lubrication, sealing, heat dissipation, cleaning and wear reduction. The original engine oil already contains additives such as wear reduction, so it is not recommended to use additive products other than engine oil.
More attention should be paid to the maintenance of the engine. As the power source of the car, maintenance of the engine is particularly important. In addition to regular oil maintenance, other maintenance is also needed. When you go to the 4s store for engine maintenance, you are often advised to use engine protector.
I'll tell you very clearly: no need! The so-called engine protector is to levy your IQ tax. There are already many kinds of additives in the oil used in engine maintenance, including enhancing lubrication, removing sludge carbon, preventing metal corrosion, regulating the sticky temperature characteristics, etc., as many as a dozen additives.
Useful. Function: Anti-wear agent is added to the protective agent, which can effectively prevent the internal parts of the engine from accelerating wear, and reducing the resistance can make the engine get better power in the state of good speed. Reduce noise. Performance: ● It can effectively reduce wear and resistance, improve mechanical efficiency, and reduce engine noise.
1. Che David's anti-wear protector is useful, because the quality of Che David's anti-wear protection agent is reliable, the wear-resistant effect is obvious and the cost-effective, and the reputation is very good.
2. The wear-resistant effect is obvious: the use of anti-wear protector of the car David engine can significantly reduce the wear of engine parts and extend the service life of the engine.It can form a protective film to reduce direct contact with the metal surface and reduce wear and friction.
3. Reliable. According to the inquiry enterprise investigation, Che David has a business license, is filed in the Administration for Industry and Commerce, and has legal protection, so Che David is reliable. The anti-wear protector of the car David engine has a certain effect.
4. The engine wear-resistant protective agent has a certain effect, but it is only temporary. A good protective agent is also relatively expensive, and the oil has a proportion. Adding additives at will may change the nature of the oil and affect the state of the engine. So it's better to change to a higher level of engine oil.
5. Che David engine wear-resistant protector is an additive that can be used to protect automobile engines. However, cars of different brands and models may addThe applicability of additives is different, so it is recommended to check the instructions of the car or consult the manufacturer or repair shop before use to ensure that the additive is suitable for your car.
How to use analytics for HS classification
author: 2024-12-24 02:39Predictive trade compliance scoring
author: 2024-12-24 02:23Processed seafood HS code references
author: 2024-12-24 02:02How to leverage customs rulings data
author: 2024-12-24 01:38Global trade intelligence newsletter
author: 2024-12-24 00:35HS code compliance in African unions
author: 2024-12-24 01:47How to navigate non-tariff barriers
author: 2024-12-24 01:42Global trade intelligence forums
author: 2024-12-24 00:59Refined sugar HS code identification
author: 2024-12-24 00:44Data-driven export licensing compliance
author: 2024-12-24 00:18916.42MB
Check422.91MB
Check473.42MB
Check234.15MB
Check836.42MB
Check281.74MB
Check158.48MB
Check743.39MB
Check267.36MB
Check369.11MB
Check539.92MB
Check584.57MB
Check372.82MB
Check447.33MB
Check366.82MB
Check891.79MB
Check737.76MB
Check233.12MB
Check254.99MB
Check642.28MB
Check951.58MB
Check838.99MB
Check125.23MB
Check838.27MB
Check457.74MB
Check261.97MB
Check387.88MB
Check191.87MB
Check485.38MB
Check652.47MB
Check794.26MB
Check477.35MB
Check581.42MB
Check437.39MB
Check641.75MB
Check341.73MB
CheckScan to install
How to ensure tariff compliance to discover more
Netizen comments More
2059 HS code research for EU markets
2024-12-24 01:47 recommend
1560 How to select the best trade data provider
2024-12-24 00:59 recommend
2567 Top trade data APIs for developers
2024-12-24 00:51 recommend
185 Customs compliance scorecards
2024-12-24 00:37 recommend
852 How to forecast trade demand spikes
2024-12-24 00:23 recommend