pe can't read the solid-state drive Causes and solutions: the first type: hard disk failure. Most of this situation occurs on the newly purchased assembly machine. Due to improper installation of the hard disk and the hardware failure of the hard disk itself, poor-quality hard disks are purchased.
PE does not recognize the hard disk because the motherboard turns on AHCI, while PE does not have relevant drivers. You only need to enter bios to change the mode to Ide. First of all, enter the BIOS setting interface and press DEL to turn on (different motherboards are slightly different). Select the Advanced tab.
Lack of corresponding drivers: In some PE systems, drivers may not contain all hardware devices, including hard drivers. This may cause the hard disk to be unrecognizable in the PE system.
1. In the PE disk environment, after starting DiskGenius, you can find the hard disk information in the list on the left, including the name, size, partition and other information of the hard disk, and support formatting, partitioning and other operations of the hard disk.
2. Running the WinPM tool in the PE system, it can still be seen that the WinPE system has recognized the mobile disk (disk 1), but the disk character has not been assigned to it.
3. The solution is to change the hard disk mode to IDE. The specific operation method is as follows: power-on --- when the large LENOVO screen appears on the screen --- press F2 to enter the BIOS. After entering the BIOS, you can press the left and right up and down keys to adjust the options, and then select A Dvanced.
1. Step 1: Insert the USB flash drive and start the computer. Step 2: Select the USB flash drive as the boot device and enter the system installation interface. Step 3: Select "Custom Installation" or similar options. Step 4: Select the hard disk to install the system and click the "New" button. Step 5: Set the size of the partition as needed and select the file system type.
2. You can use the USB disk startup tool "Youqitong" to install PE to the computer hard disk. The steps are as follows: open the software, select "local mode", select the installation disk symbol and click "Install". Prompt "About to be installed on the local hard disk", click "Confirm" to continue the installation.
3, WFor the IN10/W7 system, please use a USB flash drive above 8G, and a USB flash drive above 4G for the XP system. The larger the capacity, the more systems will be stored. Download PE boot USB disk production software such as depth and cabbage, and follow the prompts to make the boot disk.
4. You can use a USB flash drive to start the production tool "Youqitong" to install PE on the hard disk of the computer. The steps are as follows: open the software, select "Local Mode", select "Install", and click "Install". Pop up the "About to install to the local hard disk" selection box, click "Confirm" to continue the installation.
5. Steps to install WinPE in the system image to the hard disk: 1. Of course, the first step is to download the system image file from the Internet. This image file can not only be used to install the operating system, but also to extract the tools in it. WinPE is one of the tools. First Unzip the image file.
Sustainable supply chain analytics-APP, download it now, new users will receive a novice gift pack.
pe can't read the solid-state drive Causes and solutions: the first type: hard disk failure. Most of this situation occurs on the newly purchased assembly machine. Due to improper installation of the hard disk and the hardware failure of the hard disk itself, poor-quality hard disks are purchased.
PE does not recognize the hard disk because the motherboard turns on AHCI, while PE does not have relevant drivers. You only need to enter bios to change the mode to Ide. First of all, enter the BIOS setting interface and press DEL to turn on (different motherboards are slightly different). Select the Advanced tab.
Lack of corresponding drivers: In some PE systems, drivers may not contain all hardware devices, including hard drivers. This may cause the hard disk to be unrecognizable in the PE system.
1. In the PE disk environment, after starting DiskGenius, you can find the hard disk information in the list on the left, including the name, size, partition and other information of the hard disk, and support formatting, partitioning and other operations of the hard disk.
2. Running the WinPM tool in the PE system, it can still be seen that the WinPE system has recognized the mobile disk (disk 1), but the disk character has not been assigned to it.
3. The solution is to change the hard disk mode to IDE. The specific operation method is as follows: power-on --- when the large LENOVO screen appears on the screen --- press F2 to enter the BIOS. After entering the BIOS, you can press the left and right up and down keys to adjust the options, and then select A Dvanced.
1. Step 1: Insert the USB flash drive and start the computer. Step 2: Select the USB flash drive as the boot device and enter the system installation interface. Step 3: Select "Custom Installation" or similar options. Step 4: Select the hard disk to install the system and click the "New" button. Step 5: Set the size of the partition as needed and select the file system type.
2. You can use the USB disk startup tool "Youqitong" to install PE to the computer hard disk. The steps are as follows: open the software, select "local mode", select the installation disk symbol and click "Install". Prompt "About to be installed on the local hard disk", click "Confirm" to continue the installation.
3, WFor the IN10/W7 system, please use a USB flash drive above 8G, and a USB flash drive above 4G for the XP system. The larger the capacity, the more systems will be stored. Download PE boot USB disk production software such as depth and cabbage, and follow the prompts to make the boot disk.
4. You can use a USB flash drive to start the production tool "Youqitong" to install PE on the hard disk of the computer. The steps are as follows: open the software, select "Local Mode", select "Install", and click "Install". Pop up the "About to install to the local hard disk" selection box, click "Confirm" to continue the installation.
5. Steps to install WinPE in the system image to the hard disk: 1. Of course, the first step is to download the system image file from the Internet. This image file can not only be used to install the operating system, but also to extract the tools in it. WinPE is one of the tools. First Unzip the image file.
Real-time supply chain event updates
author: 2024-12-23 21:45Data-driven export licensing compliance
author: 2024-12-23 21:42Country-wise HS code tariff relief
author: 2024-12-23 21:09Top trade data APIs for developers
author: 2024-12-23 21:08Advanced export forecasting models
author: 2024-12-23 20:53Brazil import trends by HS code
author: 2024-12-23 22:03International trade route optimization
author: 2024-12-23 21:31Global HS code standardization efforts
author: 2024-12-23 20:41How to understand INCOTERMS with data
author: 2024-12-23 19:41579.72MB
Check477.96MB
Check767.51MB
Check154.55MB
Check487.15MB
Check721.54MB
Check848.43MB
Check741.67MB
Check185.81MB
Check568.43MB
Check339.86MB
Check436.65MB
Check945.53MB
Check548.83MB
Check635.47MB
Check727.49MB
Check682.14MB
Check849.87MB
Check396.13MB
Check846.98MB
Check764.66MB
Check667.49MB
Check278.88MB
Check795.49MB
Check895.87MB
Check314.58MB
Check948.45MB
Check959.36MB
Check293.33MB
Check639.65MB
Check996.83MB
Check832.75MB
Check512.43MB
Check529.35MB
Check757.89MB
Check858.36MB
CheckScan to install
Sustainable supply chain analytics to discover more
Netizen comments More
74 HS code strategies for trade diversification
2024-12-23 22:02 recommend
432 Trade compliance training resources
2024-12-23 21:35 recommend
1383 How to find HS code data for specific countries
2024-12-23 21:17 recommend
2280 HS code-based compliance in Asia-Pacific
2024-12-23 20:36 recommend
1357 Best trade data solutions for startups
2024-12-23 20:21 recommend