The correct way to use the seat belt is as follows: the position of the seat belt cannot be placed under or behind the arm. The position of the seat belt should not exceed the face and neck. It is recommended that children aged 4-12 sit tall and fasten their seat belts. Children can choose children's safety cushions and seats to reduce damage to children's chest and head and neck during collision.
The correct way to wear a seat belt. The main function of the seat belt shoulder strap and belt is to cushion the forward or backward inertia of the driver and passenger in the event of an accident, and to fix it on the seat as much as possible.When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
The correct way to wear the vehicle seat belt is to: adjust the height of the seat belt; make the seat belt cross the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tight to prevent the human body from slipping off the belt or damaging the waist.
1. Four points of car seat belts Correct wearing and understanding seat belts Car seat belts are the most basic and effective in-car safety protection devices. In the event of an unexpected situation, the degree and strength of the collision between the people in the car and the vehicle itself can be maximized.
2. The correct way to wear a vehicle seat belt is: adjust the height of the seat belt;Put the seat belt across the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tightly tied to prevent the human body from slipping off the belt or damaging the waist.
3. According to the regulations, you must wear a seat belt when driving, otherwise you will be fined 200 yuan and deducted 2 points. When driving, you should concentrate and don't be distracted.
4. The method of wearing a car seat belt is very simple. The specific steps are as follows: 1. Press the adjustment switch on the seat belt B pillar to adjust the seat belt to a height suitable for the driver and passengers. Pull the seat belt so that the shoulder strap of the seat belt passes through the chest cavity, the strap is close to the hip bone, and then insert the plug of the seat belt into the card slot.
1. The first step in using the seat belt is to adjust the position of the seat belt shoulder.The seat belt position adjustment mechanism is located near the b residence, which can be moved up and down to make the three-point seat belt adapt to drivers of different heights.
2. The seat belt of the long-distance bus is located on both sides of the seat, so it is enough to tie the seat belt to the waist from both sides of the body. When using the seat belt buckle at the same time, slowly lengthen the seat belt until the seat belt can fit with the snap buckle. When using the seat belt, ensure the correct wearing position of the seat belt will The connecting part of the seat belt is fastened.
3. The first step in using a seat belt is to adjust the position of the seat belt shoulder. The seat belt position adjustment mechanism is located near the B residence, which can be moved up and down, so that the three-point seat belt adapts to drivers at different heights. Seat belts were born in car racing.
The correct way to wear a seat belt The main function of the seat belt shoulder strap and belt is to buffer the inertia of the driver and passenger forward or backward in the event of an accident, and to fix it on the seat as much as possible. When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
Car seat belts play a restraining displacement and buffering role. When the vehicle collides or uses emergency braking, the pre-tightening device of the car seat belt will be closed instantly, tightening the loose seat belt when the belt is tightened, and the driver and passenger are firmly tied to the seat to prevent a second collision.
The key function of the shoulder straps and belts of the seat belt is to cushion the driver and passenger's forward or backward inertia in the event of an accident and fix it to the seat as much as possible.Introduction to the use of car seat belts: Introduction The retractor is the most complex mechanical part of the seat belt, which is used to store the webbing and lock the webbing from being pulled out.
Car seat belts are safety devices to restrain the occupants in the event of a collision and to avoid a second collision between the occupant with the steering wheel and dashboard, etc. during the collision or to avoid rushing out of the car and causing death and injury during the collision. Car seat belts, also known as seat belts, are a kind of occupant restraint device.
A cost-effective car must first have excellent safety performance. The most basic safety configuration of a car is a seat belt. How to use a seat belt correctly? It is necessary to explain clearly here.
*
Trade data for government agencies-APP, download it now, new users will receive a novice gift pack.
The correct way to use the seat belt is as follows: the position of the seat belt cannot be placed under or behind the arm. The position of the seat belt should not exceed the face and neck. It is recommended that children aged 4-12 sit tall and fasten their seat belts. Children can choose children's safety cushions and seats to reduce damage to children's chest and head and neck during collision.
The correct way to wear a seat belt. The main function of the seat belt shoulder strap and belt is to cushion the forward or backward inertia of the driver and passenger in the event of an accident, and to fix it on the seat as much as possible.When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
The correct way to wear the vehicle seat belt is to: adjust the height of the seat belt; make the seat belt cross the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tight to prevent the human body from slipping off the belt or damaging the waist.
1. Four points of car seat belts Correct wearing and understanding seat belts Car seat belts are the most basic and effective in-car safety protection devices. In the event of an unexpected situation, the degree and strength of the collision between the people in the car and the vehicle itself can be maximized.
2. The correct way to wear a vehicle seat belt is: adjust the height of the seat belt;Put the seat belt across the center of the shoulder to prevent it from cutting the neck too high or slipping too low; keep the waist tightly tied to prevent the human body from slipping off the belt or damaging the waist.
3. According to the regulations, you must wear a seat belt when driving, otherwise you will be fined 200 yuan and deducted 2 points. When driving, you should concentrate and don't be distracted.
4. The method of wearing a car seat belt is very simple. The specific steps are as follows: 1. Press the adjustment switch on the seat belt B pillar to adjust the seat belt to a height suitable for the driver and passengers. Pull the seat belt so that the shoulder strap of the seat belt passes through the chest cavity, the strap is close to the hip bone, and then insert the plug of the seat belt into the card slot.
1. The first step in using the seat belt is to adjust the position of the seat belt shoulder.The seat belt position adjustment mechanism is located near the b residence, which can be moved up and down to make the three-point seat belt adapt to drivers of different heights.
2. The seat belt of the long-distance bus is located on both sides of the seat, so it is enough to tie the seat belt to the waist from both sides of the body. When using the seat belt buckle at the same time, slowly lengthen the seat belt until the seat belt can fit with the snap buckle. When using the seat belt, ensure the correct wearing position of the seat belt will The connecting part of the seat belt is fastened.
3. The first step in using a seat belt is to adjust the position of the seat belt shoulder. The seat belt position adjustment mechanism is located near the B residence, which can be moved up and down, so that the three-point seat belt adapts to drivers at different heights. Seat belts were born in car racing.
The correct way to wear a seat belt The main function of the seat belt shoulder strap and belt is to buffer the inertia of the driver and passenger forward or backward in the event of an accident, and to fix it on the seat as much as possible. When wearing a seat belt correctly, the shoulder strap should cross the chest cavity, and the belt should be close to the hip bone.
Car seat belts play a restraining displacement and buffering role. When the vehicle collides or uses emergency braking, the pre-tightening device of the car seat belt will be closed instantly, tightening the loose seat belt when the belt is tightened, and the driver and passenger are firmly tied to the seat to prevent a second collision.
The key function of the shoulder straps and belts of the seat belt is to cushion the driver and passenger's forward or backward inertia in the event of an accident and fix it to the seat as much as possible.Introduction to the use of car seat belts: Introduction The retractor is the most complex mechanical part of the seat belt, which is used to store the webbing and lock the webbing from being pulled out.
Car seat belts are safety devices to restrain the occupants in the event of a collision and to avoid a second collision between the occupant with the steering wheel and dashboard, etc. during the collision or to avoid rushing out of the car and causing death and injury during the collision. Car seat belts, also known as seat belts, are a kind of occupant restraint device.
A cost-effective car must first have excellent safety performance. The most basic safety configuration of a car is a seat belt. How to use a seat belt correctly? It is necessary to explain clearly here.
*
Global trade compliance automation suites
author: 2024-12-23 22:55HS code analytics for import quotas
author: 2024-12-23 22:35Global logistics analytics platforms
author: 2024-12-23 22:16HS code utilization in bonded warehouses
author: 2024-12-23 21:26Regional trade agreements HS code mapping
author: 2024-12-23 21:13Supplier onboarding with data analytics
author: 2024-12-23 20:48How to use trade data for market expansion
author: 2024-12-23 20:48Grain imports HS code data trends
author: 2024-12-23 20:28611.57MB
Check831.78MB
Check991.84MB
Check356.48MB
Check188.93MB
Check683.64MB
Check518.47MB
Check318.35MB
Check195.84MB
Check746.79MB
Check943.75MB
Check989.78MB
Check125.44MB
Check462.49MB
Check911.32MB
Check978.95MB
Check479.44MB
Check492.49MB
Check691.44MB
Check118.99MB
Check972.31MB
Check843.71MB
Check422.24MB
Check569.51MB
Check361.14MB
Check759.99MB
Check619.41MB
Check745.14MB
Check972.51MB
Check356.58MB
Check715.55MB
Check924.29MB
Check316.93MB
Check129.42MB
Check627.14MB
Check778.37MB
CheckScan to install
Trade data for government agencies to discover more
Netizen comments More
592 Trade compliance automation tools
2024-12-23 22:05 recommend
2847 Automotive supply chain transparency tools
2024-12-23 21:54 recommend
2515 HS code-driven import quality checks
2024-12-23 21:19 recommend
2540 HS code-based market share analysis
2024-12-23 21:07 recommend
661 Industry-wise trade data breakdowns
2024-12-23 20:34 recommend