How to map complex products to HS codes

List of the catalog of this article:

• 1,How to map complex products to HS codes How to change the reversing bulb of the car?
• 2, What are the car bulb models
• 3, Are the low beam and high beam of the car the same light bulb?
• 4. Are there many types of bulbs for car headlights? What are they?

How to change the reversing bulb of the car?

Replacing the reversing light of Baojun 730 requires the following steps: Open the luggage compartment cover at the rear of the car and find the position of the reversing light. Gently unscrew the lampshade of the reversing light with a screwdriver or finger and remove it. Gently turn or swing the bulb of the reversing light with your hand and take it out.

How to change the reversing bulb of the car? Open the trunk lid. Screw off the fixing screw of the suitcase cover and remove the cover. Separate connection. Screw the nut by turning the nut counterclockwise. Take out the lamp assembly.Turn the light bulb socket counterclockwise until the tongue on the light bulb socket is right for the guide groove on the assembly, and then the light bulb socket can be removed from the assembly.

The replacement method of Fiesta reversing bulb is as follows: open the hood of the vehicle, find the reversing bulb, and then unplug the power cord. Use a small screwdriver to unscrew the shell screw of the reversing bulb. Pull out the old reversing bulb. Insert the new reversing bulb into the housing and tighten the screws with your hands.

What are the models of car light bulbs

There are many models of car light bulbs, which are mainly divided into H and D, which can be distinguished according to the number of lamp feet and teeth. Common models include HHHHH11 and so on. Different types of light bulbs are used in different positions.

HHH7 is three different models of light bulbs, all of which have halogen lamps and xenon lamps.

H4 is a double-filament tripod bulb. The near-light and high-beam are in one bulb. The standard is low-beam 55W and high-beam 60W; or near-beam 90W and high-beam 100W. Motorcycles are generally H4, 35W both far and near, or 35W far and 25W near. BAY15d, BA15d, BA15s, B13d and B10d are used for signal lights (brake steering).

Baojun 530 headlight bulb H7. There are many models of car light bulbs. Their main differences are the difference in bulb base, interface and external dimensions. Common models include HHHH900900D2S, D2C, etc.

Car lights are one of the important safety devices for vehicles. Different models of lights have different functions and uses. Generally speaking, car lights are divided into the following models: Headlights: Headlights are the main lighting equipment for vehicles, which can illuminate the road ahead from a long distance.

Are the low beam and high beam of the car the same light bulb?

The bulbs of car low beams and high beams are the same, but the power is different. The filament of the low beam is low beam, while the filament of the high beam is high beam.The loar beam lamp is for close-range lighting. The design requirements are that the irradiation range is large (160°), the irradiation distance is short, and the concentration cannot be adjusted. The irradiation distance is about 30 to 40 meters.

It's the same light. Now cars are integrated headlights with high and low beams. Working principle: There are two beams of light in a single lamp, which refers to two beams of light in a single light bulb. Turn on the high beam at night when there are no street lights on the roadside or the road is straight and far away, and turn on the high beam when rotating forward is the high beam.

The bulbs of low beams and high beams are configured with different bulb models according to different models. Some vehicles are integrated with high and low beams, and some vehicles have separate high and low beams.

No, the bulbs of low beams and high beams are configured with different bulb models depending on the car model. Some vehicles have integrated high and low beams, and some vehicles have separate high and low beams.Nowadays, most high beams and low beams of cars are not the same bulb. The high beams and low beams of cars are two sets of bulbs respectively.

In the low beam state, the light is on, and the shade plate will block a certain amount of light, so that the reflection angle of the headlight will be low, and part of the light will be blocked; in the high beam state, the working state of the bulb itself has not changed, and the shade plate is turned on, no longer blocking the light, full irradiation, which is high beam.

Nowadays, most high beams and low beams of cars are not the same light bulb. The high beam and low beams of cars are two sets of bulbs respectively. The all-in-one type is divided into two types: one is high and low beam integrated, and one is probably an integrated H4 bulb, which is mainly used in some low-end cars.

Are there many types of bulbs for car headlights? What are they?

1. Halogen headlights, also known as tungsten halide headlights, are a variant of incandescandes and are widely used in the field of automotive lighting. The principle is to use the current of the resistance to heat up, and when the temperature is high enough, it emits a wavelength of blackbody radiation in the visible light frequency band.

2. Car headlights are also car front lights, including halogen lamps, xenon lamps, LED lamps and laser lamps. The most common car headlights are halogen lamps and LED lamps.

3. Car headlights refer to car headlights, including halogen lights, xenon lights, LED lights and laser lights. The most common car headlights are halogen lights and LED lights. The use and maintenance of car lights cannot be ignored.

4. Hello, there are four kinds of car headlights, namely halogen headlights, xenon headlights, LED headlights and laser headlights.Halogen headlights are currently the most commonly used type of automotive headlight source by major automobile manufacturers in all kinds of cars. Because the price of halogen lamps is relatively cheap, they are very suitable for some low-priced economic models.

5. Headlights: The main purpose of headlights is to illuminate the roads and objects in front of the car to ensure driving safety. It can also use the alternating change of high beam and near beam as a night overtaking signal. Headlights are installed on both sides of the head of the car, and each car is equipped with 2 or 4. The power of the bulb is 45~60W for high beam and 25~55W for low beam.

6. Headlight structure editing voice car headlights are generally composed of three parts: light bulb, reflector and light distribution mirror (astigm mirror). The bulbs used in the headlights include incandescent bulbs, halogen tungsten bulbs, new high-brightness arc lamps, etc. ( 1) Incandescent bulb: its filament is made of tungsten filament (tungsten has a high melting point and strong luminescence).